Technical Specification
Technical specification of vitreous sanitaryware as per IS 2556 (part 3) : 2004
| NAME OF TEST | AS PER IS 2556 ( Pan 3 ) 2024 | OUR TEST VALUES |
|---|---|---|
| Crazing Test | No Crazing up to 2 Cycle up to 5 hrs. Each Cycle or 10 Hours At Pressure 0.34 to 0.37 Mps. | No Problem Up to Cycle and No Crazing |
| Water absorption | Average Value Should not exceed more than 05% | Max 0.30% show better vitrication |
| Modulus of repture | Not less than 60 MPS. | Min 70Mps./ Min 80 MPS. |
| Chemical resistance | No loss of reflectivity of the glaze when compared with control sample | No loss of reflectivity of the glaze when compared with control sample. |
| Resistance to staining and Buring | No Stain shall remain on either of test pries | No Stain shall remain on either of test price |
| Wavy finish | None on all visible surface | None on all visible surface |
| Discoloration | None on all visible surface | None on all visible surface |
Maintainance
Like any other part of your house, the bathroom can be made to look great and made to last if it is taken care of regularly. To make your bathroom beautiful here are some invaluable tips.
Wash Basin
A mild detergent can be used to wash the basin at least once a day. After Washing, the basin should be wiped out clearly to avoid water stains.
Closets
Clear the closet with soft plastic brush, at least once a day.
To avoid minute discoloring, after flushing the toilet give it a rinse over with the soft brush. Keep the toilets and
basins clean, if there has been no maintenance since long period of time, water deposits and discoloration can
form on the surface of areas that get wet. In such cases, these stains / marks can be removed with the help of a
solution of dilute hydrochloric acid.
Clean with a soft cotton cloth and warm water with soap.
Do not use thinner, dry cleaning liquids or powder paste. Use a liquid cleaner at least twice a week.
Use Brasso or car rubbing compound and then polish with a cloth to remove fine scratches.
